HDBaseT/HDMI via Single CAT5e/6 (Tx+Rx Set) Extenders with Audio De-embedding, EDID Control, Hot Plug Control, Long Range Mode, Full Buffer System, HDMI Pass-through, Ethernet, IR Sensor, Up/Down IR & RS-232, support Ultra HD/4K & HDCP2.2(KD-CAT6STP1X is Highly Recommended)
Key Features:
  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Signal Extension:
    • Standard Mode (HDBaseT Class A) Supports resolutions up to 4K/UHD:
      • Up to 350 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling
      • Up to 230 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP
      • Up to 400 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
      • Up to 330 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
    • Long Range Mode (4K resolutions not supported):
      • Up to 600 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
      • Up to 500 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • Audio De-Embedding: Audio from the HDMI input is de-embedded through the Coax digital (PCM) and/or Analog L/R audio output
  • HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDCP 2.2 and HDMI 2.0 4:2:0/8 Bit profile
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake, Hot Plug control
  • HDMI Pass-through: Port on Tx unit connects additional devices up to 20 ft.
  • IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on DB9 connector
  • Rotary SwitchRS-232 Control Mode: Provides control of Tx unit
  • Ethernet: Bi-directional control and/or 10/100 LAN network via TCP/IP RJ45 port
  • 3D: Support for standard 3D stereoscopic signal formats
  • Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD
  • CEC Support: For inter-device control between main input and output HDMI channel
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
  • Daisy Chaining: Connection of Tx and Rx units allows almost unlimited extension of HDMI, RS-232, IR and Ethernet signals
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton® etc.
Downloads:
  • Catalog Page
  • Operation Manual
  • Hires
  • Key Digital HDMI baluns performance as used with various CAT5e/6 cables (PDF)
General Info:
  • Inputs Tx (Each): 1 HDMI, 1 IR In, 1 Bi-Directional RS-232, 1 TCP/IP
  • Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 IR Out, 1 Analog Audio, 1 Digital Audio, 1 HDMI pass-through
  • Inputs Rx (Each): 1 CAT5e/6 UTP/STP, 1 IR In
  • Outputs Rx (Each): 1 HDMI, 1 Bi-Directional RS-232, 1 TCP/IP
  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Product (Each): 5” x 4.06” x 1.06”, Weight: 0.6 lbs
  • Shipping Carton: 8.67” x 4.1” x 4.7”, Weight: 2.5 lbs
  • Power Supply: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector
  • Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor
  • IR Emitter: KD-IRE3501F1
  • IR Receiver/Sensor: KD-IRSR001