HDBaseT/HDMI via Single CAT5e/6 (Tx + Rx Set) Extenders with HDCP2.2, 4K
Key Features:
  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Signal Extension:
    • Up to 150 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling
    • Up to 125 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP
    • Up to 250 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
    • Up to 230 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDCP 2.2 and HDMI 2.0 4:2:0/8 Bit profile
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, and EDID Control handshake, Hot Plug control
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on 3.5mm connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit
  • 3D: Support for standard 3D stereoscopic signal formats
  • Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
  • CEC Support: For inter-device control between main input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, RTI®, Savant, URC®, Leviton® etc.
Downloads:
  • Catalog Page
  • Operation Manual
  • Hires
  • Key Digital HDMI baluns performance as used with various CAT5e/6 cables (PDF)
General Info:
  • Inputs Tx (Each): 1 HDMI, 1 IR In
  • Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 IR Out /RS-232 Bi-Directional
  • Inputs Rx (Each): 1 CAT5e/6 UTP/STP, 1 IR In
  • Outputs Rx (Each): 1 HDMI, 1 IR Out/RS-232 Bi-Directional
  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Product (Each): 4.125” x 2.625” x 0.875”, Weight: 0.5 lbs
  • Shipping Carton: 6.9” x 3.9” x 3”, Weight: 2 lbs
  • Power Supply: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector
  • Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor
  • IR Emitter: KD-IRE3501F1
  • IR Receiver/Sensor: KD-IRSR001
All Key Digital® products are covered by a Limited 3 Year Product Warranty – click here for full warranty information.