HDBaseT/HDMI and VGA/Audio via Single CAT5e/6 (Tx + Rx Set) Extenders, support Ultra HD/4K, EDID Control, Hot Plug Control, Full Buffer System, HDMI Pass-through, Ethernet, IR Sensor, Up/Down IR & RS-232 (KD-CAT6STP1X is Highly Recommended)
Key Features:
  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Signal Extension:
    • Standard Mode (HDBaseT Class A) Supports resolutions up to 4K/UHD:
      • Up to 300 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling
      • Up to 250 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP
      • Up to 400 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
      • Up to 300 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
    • Long Range Mode (4K resolutions not supported):
      • Up to 600 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
      • Up to 500 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
  • 4K/Ultra HD: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4 or 60Hz at 4:2:0
  • Analog to Digital Video: Converted VGA Video + Audio input signals active on HDMI pass-through (Tx unit) and HDMI output (Rx unit) ports
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
  • HDMI Pass-through: Port on Tx unit connects additional devices up to 20 ft.
  • IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on DB9 connector
  • RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • Ethernet: Bi-directional control and/or 10/100 LAN network via TCP/IP RJ45 port
  • Intelligent Auto Sense (iAS™): Input signal sensing enables auto switching to the active input
  • 3D: Support for standard 3D stereoscopic signal formats
  • Deep Color Support: 12bit Deep Color video / 8bit color for 4K/60
  • CEC Support: For inter-device control between main input and output HDMI channel
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
  • Licensing: Fully licensed and compatible with HDMI up to 4KUHD/60Fps and HDCP 1.0 to HDCP 1.4 technologies. For HDCP 2.2 sources use KD-HDFIX22 in conjunction with this product.
  • Daisy Chaining: Connection of Tx and Rx units allows almost unlimited extension of HDMI, RS-232, IR and Ethernet signals
  • HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Honeywell®, HAI®, Leviton® etc.
Downloads:
  • Catalog Page
  • Application Example
  • Operation Manual
  • Hires
  • Key Digital HDMI baluns performance as used with various CAT5e/6 cables (PDF)
General Info:
  • Inputs Tx: HDMI, IR In, RS-232, TCP/IP
  • Outputs Tx: CAT5e/6 UTP/STP, IR Out, HDMI pass-through
  • Inputs Rx: CAT5e/6 UTP/STP, IR In
  • Outputs Rx: HDMI, IR Out, RS-232
  • Regulation: CE, FCC, RoHS, WEEE
  • Enclosure: Black Metal
  • Product (Tx): 9.5” x 4.5” x 1”, Weight: 0.95 lbs
  • Product (Rx): 6.7” x 4.1” x 1.2”, Weight: 0.8 lbs
  • Shipping Carton: 15.4” x 8.7” x 3.6”, Weight: 4 lbs
  • Power Supply: (2) UL Certified 12V / 1.25A, 110-240 VAC, 50-60 Hz
  • Accessories: ( 2) Mounting Brackets, (3) Locking HDMI Cable Clips, (1) Grounding Wire, (1) IR Emitter, (1) IR Sensor
  • IR Emitter: KD-IR3S1
  • IR Sensor: KD-IRSR001
All Key Digital® products are covered by a Limited 3 Year Product Warranty – click here for full warranty information.