Enterprise AV™ over IP Decoder, supports 4K, 2 PoE ports LAN Switch, Local HDMI Switching, Audio De-Embedding, Video Wall Processing, KVM/USB

Enterprise AV™ over IP Solutions

Key Digital’s Enterprise AV™ over IP Encoders and Decoders create expandable HDMI over IP systems
that can be scaled to fit any commercial installation, and offer variety of Usage Modes:

Digital Video Matrix
Digital Video Distribution System
Digital Video Switcher
Video Wall Controller
Digital Video Extender
KVM Matrix
Master Controller

Features

  • Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
  • Video Wall Processing:Encoder + Decoder systems create video walls with up to 8V and 8H monitors
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point
  • Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
  • Dual LAN: Enable system expansion beyond a 48 port system
  • Redundant Power Supply: Added reliability for non-PoE integration
  • Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced
    phoenix terminal to enable external audio connectivity with audio distribution systems and amplifiers
  • Audio DSP: Volume, muting, 3-band EQ, and lip-sync delay controllable on audio de-embed port
  • Local HDMI Input: Enables viewing of local or distributed HDMI source
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology
    such as 4K/UHD 4:2:0/8bit at 60 f/s
  • Control: 3 multi-function ports controllable via KeyCode open API, as Compass Control® master controller,
    or as control extension via IP
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from
    Output/Display devices connected to Decoder
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display,
    EDID Control handshake, and Hot Plug control
  • Dual USB 2.0: Support synchronous and isochronous connections
  • IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
  • RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
  • RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
  • Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® iOS App
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Data Stream Bandwidth: < 900Mbps
  • Latency: <40ms at 4K. Less at lower resolution.
Usage Modes System Diagrams
Digital Video Matrix

Digital Video Distribution System

Digital Video Switcher

Video Wall Controller

 

Digital Video Extender

KVM Matrix

Master Controller

Downloads:
General Info:
  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Product (Each): 7.5” x 5.59” x 0.85”, Weight: 0.7 lbs
All Key Digital® products are covered by a Limited 3 Year Product Warranty – click here for full warranty information.