KD-4X4

4 Inputs to 4 Outputs HDMI Matrix Switcher
(May require additional use of KD-HDDA1x1, due to non standard HDCP sources & display)

1 Key Logo

Bulletproof HDMI® solutions from Key Digital®.
Once a legal (HDCP) source(s) and legal (HDCP) displays are connected to Key Digital’s HDMI product(s) and a key has been established, Key Digital will authenticate all the topology of the connected products without a problem between the source and the display.
HDMI Advanced Features:
  • 3D - Capability to pass broadcast (1080i/720p) 3D stereoscopic signal formats
Key Features:
  • Full HDMI matrix switching between 4 HDMI sources and 4 Displays or Zones at any time and in any combination
  • Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to 1080p (60Hz & 50Hz)
    • SD & HD: 480i, 480p, 720p, 1080i, 1080p
    • VESA / VGA (RGBHV): From 640x480p up to 1920x1200p
  • Supports lossless compressed digital audio:
    • Dolby® TrueHD, Dolby® Digital Plus and DTS™-HD Master Audio
  • Internal EDID Library features 9 default EDID configurations, in addition to Native EDID data for any Output/Display
  • Light Buffer Technology
Light Buffer Technology:
  • Multiple output viewing mode is supported by a dynamic realignment in clocking that may appear as a short blink when multiple displays/outputs select a single source/input. This dynamic re-clocking improves video quality on all displays and does not affect switcher performance during non-switching operation
  • Full Buffer operation can be achieved with the use of KD-HDDA1x1 for each input, eliminating the need for dynamic realignment of your input signal

Key Benefits
  • Key Digital’s Buffered Matrix Technology™ allows up to 4 HDMI sources to be independently switched to 4 Displays or Zones at any time and in any combination
  • LED Link Lights indicate connectivity between KD-4X4 and each input & output device
  • Full Support for HDMI® with HDCP, 12-Bit Deep Color Video
  • Serial IR, Optical IR, Front Panel & bi-directional RS-232 control
  • Accept ASCII and HEX on RS232
  • Supports major control systems: Compass Control®, AMX®, Control4®, Crestron®, RTI®, Universal®, KNX®
Downloads:
  • Catalog Page
  • Application Example
  • Operation Manual
  • Specifications
Product Videos:

Key Digital @ CEDIA 2012: Champion Series Products
  • Join Key Digital's Jonathon Ferry as he explains the newest Champion Series line of HDMI and audio products from Key Digital
Compatible with:
General Info:
  • Regulation: CE, RoHS, WEEE
  • Rack Mount: 1U
  • Enclosure: Black Metal
  • Product Weight: 6 lb plus 1.5 lbs. for Rx Baluns & HDMI Cables
  • Shipping Weight: 10 lbs
  • Product Dimensions: L = 17.5" W = 5.2" H = 1.75"
  • Shipping Carton Dimensions: L = 20" W = 12.4" H = 8"
  • Accessories: IR Remote Control, (4) KD-PS5V2A UL Certified Power Supply - 12V / 2A

* Key Digital® HDMI® product specifications are given using only Key Digital HDMI cables. Using any other cables can alter or prevent your Key Digital HDMI product from meeting the given features and benefits of our advanced line of HDMI products. HDMI Products using CAT5/6/7 cabling should be properly terminated and of high grade in order to maintain the best performance possible.

Important: Due to differences between Category (CAT5/5e/6) cables, quality of power and ground wiring at the installation, and to ensure the maximum performance of HDMI signal extension, the use of CAT6/STP cabling is strongly recommended for installations utilizing HDMI baluns/extenders. Shielded RJ45 connectors are required when using CAT6/STP cabling. To ensure a successful ground, it is recommended to solder the metal drain wire to the shielded RJ45 connector, as this provides a more reliable ground connection than simply crimping the drain wire under the strain relief collar. CAT cabling must be terminated using the TIA/EIA-568B standard. Key Digital cannot guarantee the performance of switchers and extenders if cables/connectors other than the above specified are used.